DELL PC7024 User Manual

Page of 1730
Address Table Commands
293
Default Configuration
Forward-unregistered
Command Mode
Global Configuration mode
User Guidelines
If routers exist on the VLAN, do not change the unregistered multicast 
addresses state to 
drop on the routers ports. 
 
NOTE: 
Do not use the mac address-table multicast forbidden forward-unregistered 
command with the mac address-table multicast forward-unregistered command on 
the same interface.
Example
The following example displays how to enable forwarding of unregistered 
multicast addresses.
console(config)#bridge multicast forward-unregistered 
vlan 1
mac address-table multicast static
Use the mac address-table multicast static command in Global 
Configuration mode to register MAC layer Multicast addresses to the bridge 
table and to add ports to the group statically. To deregister the MAC address, 
use the no form of the mac address-table multicast static command.
Syntax
mac address-table multicast static vlan 
vlan-id {mac-multicast-address | ip-
multicast-address} [add | remove] [interface {gigabitethernet | port-
channel | tengigabitethernet}
 interface-list]
no mac address-table multicast static vlan
2CSPC4.XCT-SWUM2XX1.book  Page 293  Monday, October 3, 2011  11:05 AM