DELL PC7024 User Manual

Address Table Commands

console(config)#interface gigabitethernet 1/0/1

console(config-if-1/0/1)#port security trap 100

Use the port security max command in Interface Configuration mode to 

configure the maximum addresses that can be learned on the port while the 

port is in port security mode. To return to the system default, use the no form 

of this command.

port security max 

max-addr

•

max-addr — The maximum number of addresses that can be learning on 

the port. (Range: 0-600)

The default value for this command is 100.

Interface Configuration (gigabitethernet, port-channel, tengigabitethernet) 

mode

This command has no user guidelines.

The following example shows using this command in Ethernet Interface 

Configuration mode.

console(config-if-1/0/3)# port security max 80

Use the show mac address-table multicast command in Privileged EXEC 

mode to display Multicast MAC address table information.

2CSPC4.XCT-SWUM2XX1.book  Page 297  Monday, October 3, 2011  11:05 AM