Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. PC7024
  5. User Manual

DELL PC7024 User Manual

Download
Page of 1730
400
Ethernet Configuration Commands
On a storm control enabled interface, if the ingress rate of that type of packet 
(L2 broadcast, multicast, or unicast) is greater than the configured threshold 
level (as a percentage of port speed or as an absolute packets-per-second rate), 
the switch forwarding-plane discards the excess traffic.
The speed and duplex commands control interface link speeds and auto-
negotiation. If either speed or duplex is set to something other than auto, 
auto-negotiation is disabled on the interface. Auto-negotiation will link at the 
highest possible speed supported on the interface and prefers full duplex over 
half duplex.
Commands in this Chapter
This chapter explains the following commands:
clear counters
Use the clear counters command in Privileged EXEC mode to clear statistics 
on an interface.
Syntax
clear counters [{gigabitethernet 
unit/slot/port | port-channel port-channel-
number | switchport | tengigabitethernet 
unit/slot/port}]
Default Configuration
This command has no default configuration.
2CSPC4.XCT-SWUM2XX1.book  Page 400  Monday, October 3, 2011  11:05 AM