DELL PC7024 User Manual
Green Ethernet Commands
457
User Guidelines
Cable diagnostics (show copper-ports commands) may give misleading
results if green mode is enabled on the port. Disable green mode prior to
running any cable diagnostics.
green-mode eee
Use the green-mode eee command in Interface Configuration mode to
enable EEE low power idle mode on an interface. The command enables both
send and receive sides of a link to disable some functionality for power savings
when lightly loaded. Transition to Low Power Mode does not change the link
status. Frames in transit are not dropped or corrupted in transition to and
from Low Power Mode.
On combo ports, eee mode can be enabled even if the port is using the fiber
On combo ports, eee mode can be enabled even if the port is using the fiber
interface. If enabled, eee mode is only active when the copper interface is
active.
Use the no form of the command to disable the feature.
Use the no form of the command to disable the feature.
Syntax
green-mode eee
no green-mode eee
no green-mode eee
Parameter Description
This command does not require a parameter description.
Default Configuration
The default value is Disabled.
Command Mode
Interface Configuration
User Guidelines
Cable diagnostics (show copper-ports commands) may give misleading
results if green mode is enabled on the port. Disable green mode prior to
running any cable diagnostics.
2CSPC4.XCT-SWUM2XX1.book Page 457 Monday, October 3, 2011 11:05 AM