DELL PC7024 User Manual
460
Green Ethernet Commands
show green-mode
interface-id
Use the show green-mode
interface-id command in Privileged EXEC mode
to display the green-mode configuration and operational status of the port.
This command is also used to display the per port configuration and
operational status of the green-mode. The status is shown only for the modes
supported on the corresponding hardware platform whether enabled or
disabled.
Syntax
show green-mode
interface-id
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command output provides the following information.
Parameter
Description
interface-id
Any valid
interface. See Interface Naming Conventions for
interface representation.
Term
Description
Energy Detect
Energy-detect
admin mode
Energy-detect mode is enabled or disabled.
Energy-detect
operational status
Energy detect mode is currently active or inactive. The energy
detect mode may be administratively enabled, but the
operational status may be inactive. The reasons for the
operational status are described below.
2CSPC4.XCT-SWUM2XX1.book Page 460 Monday, October 3, 2011 11:05 AM