DELL PC7024 User Manual

iSCSI Optimization Commands

The Application Priority TLV sent will contain the following information in 

addition to any other information contained in the TLV:
AE Selector = 1
AE Protocol = 3260
AE Priority = priority configured for iSCSI PFC (the VPT value above)

In the following example, iSCSI is globally enabled.

console(config)#iscsi enable

Use the iscsi target port command in Global Configuration mode to 

configure iSCSI port(s), target addresses and names. To delete iSCSI port(s) 

or target ports, use the no form of this command.

iscsi target port 

tcp-port-1 [tcp-port-2.… tcp-port-16

 

[address 

ip-address] 

[name 

targetname]

no iscsi target port 

tcp-port-1 [tcp-port-2.… tcp-port-16 [address ip-address]

tcp-port 

TCP port number or list of TCP port numbers on which iSCSI 

target(s) listen to requests. Up to 16 TCP ports can be defined 

in the system in one command or by using multiple commands.

ip-address

IP address of the iSCSI target. When the no form is used, and 

the tcp port to be deleted is one bound to a specific IP address, 

the address field must be present.

2CSPC4.XCT-SWUM2XX1.book  Page 564  Monday, October 3, 2011  11:05 AM