DELL PC7024 User Manual

QoS Commands

no cos-queue strict {

queue-id-1} [{queue-id-2} … {queue-id-n}]

• queue-id-1 — Specifies the queue ID for which you are activating the 

strict priority scheduler. You can specify a queue ID for as many queues as 

you have (queue-id 1 through queue-id-n). (Range: 0–6)

This command has no default configuration.

Global Configuration mode or Interface Configuration (gigabitethernet, 

port-channel, tengigabitethernet) mode

This command has no user guidelines.

The following example displays how to activate the strict priority scheduler 

mode for two queues.

console(config)#cos-queue strict 1 2

The following example displays how to activate the strict priority scheduler 

mode for three queues.

console(config)#cos-queue strict 1 2 4

Use the diffserv command in Global Configuration mode to set the DiffServ 

operational mode to active. While disabled, the DiffServ configuration is 

retained and can be changed, but it is not activated. When enabled, DiffServ 

services are activated. To set the DiffServ operational mode to inactive, use 

the no form of this command.

2CSPC4.XCT-SWUM2XX1.book  Page 658  Monday, October 3, 2011  11:05 AM