DELL PC7024 User Manual

QoS Commands

This command has no default configuration.

Class-Map Configuration mode

This command has no user guidelines.

The following example displays adding a match condition based on the 

destination layer 4 port of a packet using the "echo" port name keyword.

console(config-classmap)#match dstl4port echo

Use the match ethertype command in Class-Map Configuration mode to add 

to the specified class definition a match condition based on the value of the 

ethertype.

match ethertype {keyword | 

0x0600-0xffff }

• keyword — Specifies either a valid keyword or a valid hexadecimal number. 

The supported keywords are 

appletalk, arp, ibmsna, ipv4, ipv6, ipx, 

mplsmcast, mplsucast, netbios, novell, pppoe, rarp. (Range: 

0x0600–0xFFFF)

This command has no default configuration.

Class-Map Configuration mode

This command has no user guidelines.

2CSPC4.XCT-SWUM2XX1.book  Page 667  Monday, October 3, 2011  11:05 AM