DELL PC7024 User Manual

VLAN Commands

Use the vlan protocol group command in Global Configuration mode to add 

protocol-based groups to the system. When a protocol group is created, it is 

assigned a unique group ID number. The group ID is used to identify the 

group in subsequent commands. Use the no form of the command to remove 

the specified VLAN protocol group name from the system.
In previous implementations, when multiple VLAN protocol groups when 

created, and then one of the groups was deleted and the configuration was 

saved, this command resulted an in incorrect application of the groupids 

upon reload So, the existing command vlan protocol group 

groupname is 

updated to vlan protocol group 

groupid so that groupid is used for both 

configuration and script generation. 

If an attempt is made to migrate to the latest implementation with any of the 

groupnames deleted prior to saving configuration on the pre  code (applicable only 

for platforms ), the problem on the latest code will remain.

vlan protocol group 

groupid

no vlan protocol group 

groupid

•

groupid — The protocol-based VLAN group ID, to create a protocol-based 

VLAN group. To see the created protocol groups, use the 

protocol all command.

This command has no default configuration.

Global Configuration mode

This command has no user guidelines.

console(config)# vlan protocol group 1 

2CSPC4.XCT-SWUM2XX1.book  Page 803  Monday, October 3, 2011  11:05 AM