DELL PC7024 User Manual
88
Command Groups
Email Alerting
ip arp inspection limit
Configures the rate limit and burst interval
values for an interface.
IC
ip arp inspection trust
Configures an interface as trusted for Dynamic
ARP Inspection.
IC
ip arp inspection validate
Enables additional validation checks like source
MAC address validation, destination MAC
address validation or IP address validation on
the received ARP packets.
GC
ip arp inspection vlan
Enables Dynamic ARP Inspection on a single
VLAN or a range of VLANs.
GC
permit ip host mac host
Configures a rule for a valid IP address and
MAC address combination used in ARP packet
validation.
ARPA
show arp access-list
Displays the configured ARP ACLs with the
rules.
PE
show ip arp inspection
interfaces
Displays the Dynamic ARP Inspection
configuration.
PE
show ip arp inspection
interfaces
Displays the Dynamic ARP Inspection
configuration on all the DAI enabled interfaces.
PE
show ip arp inspection vlan Displays the Dynamic ARP Inspection
configuration on all the VLANs in the given
VLAN range.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command
Description
Mode
a
logging email
Enables email alerting and sets the lowest
severity level for which log messages are
emailed.
GC
logging email urgent
Sets the lowest severity level at which log
messages are emailed in an urgent manner.
GC
logging traps
Sets the lowest severity level at which SNMP
traps are logged.
GC
Command
Description
Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 88 Monday, October 3, 2011 11:05 AM