DELL PC7024 User Manual

IP Routing Commands

This command has no default configuration.

User EXEC, Privileged EXEC modes

This command has no user guidelines.

The following example displays the IPv4 address of the default gateway and 

the default route associated with the gateway.

console#show ip route

Route Codes: R - RIP Derived, O - OSPF Derived, C -

Connected, S - Static

B - BGP Derived, IA - OSPF Inter Area

E1 - OSPF External Type 1, E2 - OSPF External Type 2

N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA External Type 

2

ip-address

Specifies the network for which the route is to be displayed and 

displays the best matching best-route for the address.

mask

Subnet mask of the IP address.

prefix-length

Length of prefix, in bits. Must be preceded with a forward slash 

(/). (Range: 0-32 bits.)

longer-prefixes

Indicates that the 

ip-address

 and 

subnet-mask

 pair becomes the 

prefix, and the command displays the routes to the addresses 

that match that prefix.

protocol

Specifies the protocol that installed the routes. (Range: 

connected, ospf, rip static)

2CSPC4.XCT-SWUM2XX1.book  Page 981  Monday, October 3, 2011  11:05 AM