3com TR User Manual

C

HAPTER

 4: C

ONFIGURING

 

WITH

 

THE

 VT100 I

NTERFACE

The Switch 2000 TR Unit Database View screen 
allows you to set up, maintain, and view the data-
base. The Switching Database is distributed across the 
units in a stack. You need to choose a unit before you 
can observe the addresses learned by that unit. 
Choices:

■

Adding entries to the database

■

Deleting entries from the database

■

Locating entries in the database

Select SDB at the bottom of the Unit Management 
screen to access the database. See the highlighted 
field in Figure 4-17. 

Figure 4-17   TR Management Screen

The Unit Database View appears. Refer to Figure 4-18 
and the field descriptions. 

Figure 4-18   Switch 2000 TR Unit Database View Screen 

When first powered up, the database appears empty. 
As addresses are learned or added, they appear in the 
scrolling list box.

■

Port/MAC Address—Scrollable list box displays 
the current entries for each of the ports, except the 
downlink.

■

Database Entries—Read-only field displays the 
number of entries in the database. The database 
holds up to 2000 addresses. 

■

MAC Address—Field displays the MAC address of 
a device highlighted in the scrollable list box. Press 
[Return] to view after you highlight an address.

■

Port Number—Displays the Port Number of a 
device highlighted in the scrollable list box. Press 
[Return] to view after you highlight an address.

■

FIND—Command allows you to locate any address 
entry in the database.