3com TR User Manual
5-4
C
HAPTER
5: C
ONFIGURING
WITH
THE
LCD C
ONSOLE
4
Press [Down Arrow] until Port # >Link State appears.
5
Press [Enter].
Link State # >[state] appears.
The Link State identifies the current state of the port
you are viewing.
you are viewing.
■
Disabled
■
Blocking
■
Listening
■
Learning
■
Forwarding
■
Broken
This read-only field cannot be changed.
6
Press [Left Arrow] to return to previous menu.
Setting Port State
From the Switch 2000 TR>Unit Id # LCD banner, pro-
ceed as follows:
ceed as follows:
1
Press [Enter].
Switch 2000 TR >Unit appears.
2
Press [Down Arrow] until Switch 2000 TR >Port
appears.
appears.
3
Press [Enter].
4
Press [Down Arrow] until Port # >Port State appears.
5
Press [Enter].
Port State # >[state] appears.
The Port State identifies the current state of the port
you are viewing.
you are viewing.
6
Press [Down Arrow] to select the state. Choices:
■
Enable
■
Disable
7
Press [Enter] to confirm the state.
If you select Disable, the LED for the corresponding
port lights yellow to show the current state.
port lights yellow to show the current state.
Setting Speed
From the Switch 2000 TR>Unit Id # LCD banner, pro-
ceed as follows:
ceed as follows:
1
Press [Enter].
Switch 2000 TR >Unit appears.
2
Press [Down Arrow] until Switch 2000 TR >Port
appears.
appears.
3
Press [Enter].
4
Press [Down Arrow] until Port # >Speed appears.
5
Press [Enter].
Speed # [speed] appears.
Press [Down Arrow] to select speed. Choices:
■
16 MB
■
4 MB
6
Press [Enter] to confirm the speed setting.
7
Press [Left Arrow] to return to the previous menu.