3com 3C17502 User Manual
18
C
HAPTER
1: S
WITCH
8800 C
OMPONENTS
IP address table
Up to 128 K IP address forwarding entries
IP routing
Static routing
RIP Version 1 and 2
OSPF Version 2
BGP-4
*
IS-IS
Multicast
GMRP
IGMP
PIM-DM
PIM-SM
AAA and Security
Access user authentication implements IEEE 802.1x
Local authentication and RADIUS authentication
User hierarchical management and password protection
ACL, L2/L3/L4 information filtration (including frame filtration
based on port and source/destination MAC address, packet
filtration based on source/destination IP address and type of the
upper layer protocol)
based on port and source/destination MAC address, packet
filtration based on source/destination IP address and type of the
upper layer protocol)
Plain text and MD5 text authentication for OSPF and RIP Version 2.
DES56 Encryption for SNMP v3
Reliability
VRRP
QoS
Traffic classification
Bandwidth management based on port, MAC address, IP address,
TCP/UDP port number, ToS/Diffserv value and CAR. The granularity
of bandwidth management is 64 Kbps.
TCP/UDP port number, ToS/Diffserv value and CAR. The granularity
of bandwidth management is 64 Kbps.
Priority-based on VLAN port, IEEE 801.1P and ToS/Diffserv.
Support traffic classification to set CoS
Support traffic classification to set CoS
8 egress queues for each port
Queue dispatching algorithm FIFO and PQ.
Load and upgrade system
software
software
Xmodem protocol
Telnet
FTP and TFTP
* In the advanced version of the software.
Table 28 Switch 8800 Software Features (continued)
Service
Support