3com 3C17502 User Manual

HAPTER

4: M

AINTAINING

OFTWARE

200 Type set to I.

[ftp]get 88003.app

200 PORT command successful.

150 Binary data connection for 88003.app (192.168.25.210,1117)

(6725435 bytes).

226 Binary Transfer complete.

FTP: 6725435 byte(s) received in 96.753 second(s) 25.00K

byte(s)/sec.

[ftp] quit

221 Goodbye.

<SW8800>boot boot-loader 88003.app

The specified file will be booted next time!

<SW8800>reboot

This command will reboot the system. Continue? [Y/N] y

For more detailed descriptions of the setup and procedures for upgrading
software, see the remaining sections in this chapter.

Upgrading Software

Using The BOOT Menu

To perform this operation, you must have a network connection between the
Ethernet port on the Switch 8800 Fabric module and the FTP/TFTP server. In
addition, you should verify that the file you want to use for the upgrade procedure
is on the FTP/TFTP server in the appropriate directory.

There are several procedures you must perform to complete this operation. They
are described in the following sections:

1 Boot the System

2 Modify the Ethernet Interface Boot Parameters

3 Download an Application to Flash Memory

4 Boot from Flash

Boot the System

After powering on the Switch 8800, the BootROM program runs automatically.
The terminal displays the following information:

Starting......

*************************************************

* *

* Switch 8800 Bootrom, Version 113 *

* *