Cabletron Systems 6E133-25 User Manual

Chapter 5: Local Management

Since the 6E12X-26 and 6E13X-25 are SNMP compliant devices, they 
can send messages to multiple Network Management Stations to alert 
users of status changes. The SNMP Traps screen is shown in 

Access the SNMP Traps screen from the Module Configuration Menu 
screen by using the arrow keys to highlight the SNMP TRAPS field and 
pressing ENTER. The SNMP Traps screen displays.

The following explains each field of the SNMP Traps screen.

(Modifiable)

Indicates the IP address of the workstation to receive trap alarms. Up to 
eight different destinations can be defined.

It is only necessary to assign SNMP traps if the user desires 
the traps to be sent to different addresses than those assigned 
in 

, which details how to set SNMP Traps for the 

6C105 chassis.

Firmware Revision:      XX.XX.XX

SNMP Traps

1960_17

BOOTPROM Revision: XX.XX.XX

Trap Community Name

Module Type: 6E122-26

Slot Number: 

6E122-26 LOCAL MANAGEMENT

Event Message Line

Trap Destination

Enable Traps