Cabletron Systems 6E133-25 User Manual

The General Configuration screen, 

, allows the user to set the 

system date and time, IP address and subnet mask, the default gateway, 
the TFTP Gateway IP address, the Operational Mode, the Management 
Mode, and the COM port configuration. The General Configuration 
screen also allows the user to Clear NVRAM, and enable or disable IP 
Fragmentation.

Access the General Configuration screen from the Module Configuration 
Menu screen by using the arrow keys to highlight the GENERAL 
CONFIGURATION menu item and pressing ENTER. The General 
Configuration screen, 

, displays.

The following briefly explains each General Configuration screen field:

MAC Address (Read-Only)

Displays the base physical address of the module.

IP Address (Modifiable)

This display allows the IP address to be set for the 6E12X-26 and 
6E13X-25. To set the IP address, refer to 

.

Firmware Revision:      XX.XX.XX

General Configuration

1960_15

BOOTPROM Revision: XX.XX.XX

MAC Address:

IP Address:

Subnet Mask:

Default Gateway:

TFTP Gateway IP Addr:

Module Date:

Module Time:

Screen Refresh Time:

Screen Lockout Time:

Com:  [ENABLED]                 Application:           [LM]   

Clear NVRAM       [NO]

Module Uptime XX D  XX H  XX M

Module Type: 6E122-26

Slot Number: 

IP Fragmentation  [ENABLED]

Operational Mode:  [802.1D SWITCHING]

Management  Mode:  [DISTRIBUTED]

00-00-ID-00-00-00

6E122-26  LOCAL MANAGEMENT

Event Message Line