DELL N3000 User Manual

Configuring L2 and L3 Relay Features

server-address

discard} [

dest-udp-port

Configure the relay of certain UDP broadcast packets 

received on the VLAN routing interface(s). This command 

takes precedence over an ip helper-address command given 

in global configuration mode. 
Specify the one of the protocols defined in the command 

or the UDP port number.

•

server-address

 — The IPv4 unicast or directed broadcast 

address to which relayed UDP broadcast packets are sent. 

The server address cannot be an IP address configured on 

any interface of the local router.

•

dest-udp-port

 — A destination UDP port number from 0 

to 65535. 

Exit to Global Config mode.

Exit to Privileged EXEC mode.

show ip helper-address 

[vlan 

vlan-id

]

View IP helper (L3 relay) settings for all interfaces or for 

the specified VLAN routing interface.

show ip helper statistics View the number of DHCP and other UDP packets 

processed and relayed by the UDP relay agent. To reset the 

statistics to 0, use the clear ip helper statistics command.