DELL N3000 User Manual
1174
Configuring OSPF and OSPFv3
Configuring an OSPFv3 Area Range
Beginning in Privileged EXEC mode, use the following commands to
configure an OSPFv3 area range.
Command
Purpose
configure
Enter global configuration mode.
ipv6 router ospf
Enter OSPFv3 configuration mode.
area
area-id
range
ipv6-
prefix/prefix-length
{summarylink |
nssaexternallink}
[advertise |not-advertise]
Configure a summary prefix for routes learned in a given
area.
•
area-id
— Identifies the OSPFv3 NSSA to configure.
(Range: IP address or decimal from 0–4294967295)
•
ipv6-prefix/prefix-length
— IPv6 address and prefix
length.
• summarylink — Specifies a summary link LSDB type.
• nssaexternallink — Specifies an NSSA external link
• nssaexternallink — Specifies an NSSA external link
LSDB type.
• advertise — Advertisement of the area range.
• not-advertise — Suppresses advertisement of the area
• not-advertise — Suppresses advertisement of the area
range.
exit
Exit to Global Config mode.
exit
Exit to Privileged EXEC mode.
show ipv6 ospf range
area-
id
View information about the area ranges for the specified
area-id.