DELL N3000 User Manual

Page of 1460
Configuring DHCPv6 Server and Relay Settings
1279
Configuring DHCPv6 Interface Information
Beginning in Privileged EXEC mode, use the following commands to 
configure an interface as a DHCPv6 server or a DHCPv6 relay agent. The 
server and relay functionality are mutually exclusive. In other words, a VLAN 
routing interface can be configured as a DHCPv6 server or a DHCPv6 relay 
agent, but not both.
Command
Purpose
configure
Enter Global Configuration mode.
interface {tunnel 
tunnel-id
 | vlan 
vlan-id
}
Enter interface configuration mode for a tunnel or VLAN 
routing interface to configure as a DHCPv6 relay agent.
ipv6 dhcp relay 
{destination 
relay-
address
 [interface vlan 
vlan-id
] | interface vlan 
vlan-id
} [remote-id 
{duid-ifid |
 user-
defined-string
}]
Configure the interface for DHCPv6 relay functionality.
• destination — Keyword that sets the relay server IPv6 
address.
relay-address
 — An IPv6 address of a DHCPv6 relay 
server.
• interface — Sets the relay server interface.
vlan-id
 — A valid VLAN ID.
• [remote-id {duid-ifid | 
user-defined-string
}] — The 
Relay Agent Information Option “remote ID” sub-option 
to be added to relayed messages. This can either be the 
special keyword duid-ifid, which causes the “remote ID” 
to be derived from the DHCPv6 server DUID and the 
relay interface number, or it can be specified as a user-
defined string. 
exit
Exit to Global Configuration Mode
interface {tunnel 
tunnel-id
 | vlan 
vlan-id
}
Enter interface configuration mode for a tunnel or VLAN 
routing interface to configure with DHCPv6 server 
functionality.