DELL N3000 User Manual
1302
Configuring Differentiated Services
DiffServ Class Configuration for IPv6
Beginning in Privileged Exec mode, use the following commands to configure
DiffServ classes for IPv6 and view related information.
match srcip
Add to the specified class definition a match
condition based on the source IP address of a
packet.
match srcl4port
Add to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric notation,
or a numeric range notation.
match vlan
Add to the specified class definition a match
condition based on the value of the layer 2 VLAN
Identifier field.
CLI Command
Description
configure
Enter global configuration mode.
class-map match-all
class-map-
name
ipv6
Define a new DiffServ class.
match any
Configure a match condition for all the packets.
match class-map
Add to the specified class definition the set of
match conditions defined for another class.
match dstip6
Add to the specified class definition a match
condition based on the destination IPv6 address of a
packet.
match dstl4port
Add to the specified class definition a match
condition based on the destination layer 4 port of a
packet using a single keyword, or a numeric
notation.
match ip6flowlbl
Add to the specified class definition a match
condition based on the IPv6 flow label of a packet.
match ip dscp
Add to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.
CLI Command
Description