DELL N3000 User Manual
356
Configuring SNMP
3 Create the user
admin, assign the user to the group, and specify the
authentication credentials.
console(config)#snmp-server user admin
group_snmpv3 auth-md5 secretkey
4 Specify the IP address of the host where traps are to be sent. Packet
authentication using MD5-SHA is enabled for the traps.
console(config)#snmp-server v3-host 192.168.3.35
admin traps auth
console(config)#exit
5 View the current SNMP configuration on the switch. The output includes
the SNMPv1/2 configuration in the previous example.
console#show snmp
Community-String Community-Access View Name IP Address
-------------------- ---------------- --------- -------
private Read/Write Default
All
public Read Only Default
All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Version 3 notifications
System Contact:
System Location:
Community-String
Group Name
IP Address
-----------------
--------------
------------
private
DefaultWrite
All
public
DefaultRead
All
Target Addr. Type
Community
Version UDP
Port
Filter
Name
TO
Sec
Retries
------------ ----
---------
----
----- -----
---
-------
192.168.3.65 Trap
public
1
162
Target Addr. Type
Username
Security
Level
UDP
Port
Filter
Name
TO
Sec
Retries
------------ ----
---------
-------
----- -----
---
-------
192.168.3.35 Trap
admin
Auth-NoP 162
15
3