DELL N3000 User Manual

Page of 1460
364
Managing Images and Files
• TFTP
• SFTP
• SCP
• FTP
• HTTP (Web only)
• HTTPS (Web only)
You can also copy files between the file system on the internal flash and a 
USB flash drive that is connected to the external USB port.
What Factors Should Be Considered When Managing Files? 
Uploading and Downloading Files
To use TFTP, SFTP, SCP, or FTP for file management, you must provide the 
IP address of the remote system that is running the appropriate server (TFTP, 
SFTP, SCP or FTP). Make sure there is a route from the switch to the remote 
system. You can use the ping command from the CLI to verify that a route 
exists between the switch and the remote system.
If you are downloading a file from the remote system to the switch, be sure to 
provide the correct path to the file and the correct file name. 
Managing Images
When you download a new image to the switch, it overwrites the backup 
image, if it exists. To use the new image, you must activate it and reload the 
switch. The image that was previously the active image becomes the backup 
image after the switch reloads. If you upgrade to a newer image and find that 
it is not compatible with your network, you can revert to the original image. 
If you activate a new image and reload the switch, and the switch is unable to 
complete the boot process due to a corrupt image or other problem, you can 
use the boot menu to activate the backup image. You must be connected to 
the switch through the console port to access the boot menu. The image files 
may contain firmware for the PHY processors on the switch. The PHY 
firmware may be updated to the firmware version supported by the switch 
firmware during the boot process or, in the case of switches that support the 
hot swap of cards, when the card is inserted into the switch.