DELL N3000 User Manual

500

Configuring Port Characteristics

Port Configuration Examples

This section contains the following examples:

Configuring Port Settings

The commands in this example specify the speed and duplex mode for port 1

(gigabitEthernet 1/0/1) and change the system MTU size.
To configure the switch:

1 Enter Interface Configuration mode for port 1.

console#configure

console(config)#interface gigabitEthernet 1/0/1

2 Change the speed and duplex settings for the port.

console(config-if-Gi1/0/1)#speed 100

console(config-if-Gi1/0/1)#exit

3 Enable jumbo frame support on the interfaces.

console(config)#system jumbo mtu 9216

console(config)#CTRL + Z

4 View summary information about the ports

console#show interfaces configuration

Port Type

Duplex Speed Neg Admin St.

--------- -------------

------ ------- ---- -----

Gi1/0/1 Gigabit - Level

Full 100 Off Up

Gi1/0/2 Gigabit - Level

N/A Unknown Auto Up

Gi1/0/3 Gigabit - Level

N/A Unknown Auto Up

Gi1/0/4 Gigabit - Level

N/A Unknown Auto Up

Gi1/0/5 Gigabit - Level

N/A Unknown Auto Up

Te1/0/1 10G - Level

N/A Unknown Auto Up

Te1/0/2 10G - Level

N/A Unknown Auto Up

Te1/0/3 10G - Level

N/A Unknown Auto Up

Te1/0/4 10G - Level

N/A Unknown Auto Up

Te1/0/5 10G - Level

N/A Unknown Auto Up

--More-- or (q)uit