DELL N3000 User Manual

Page of 1460
Configuring VLANs
661
Default VLAN Behavior
One VLAN is configured on the Dell Networking series switches by default. 
The VLAN ID is 1, and all ports are included in the VLAN as access ports, 
which are untagged. This means when a device connects to any port on the 
switch, the port forwards the packets without inserting a VLAN tag. If a 
device sends a tagged frame to a port with a VLAN ID other than 1, the frame 
is dropped. Since all ports are members of this VLAN, all ports are in the same 
broadcast domain and receive all broadcast and multicast traffic received on 
any port.
When you create a new VLAN, all trunk ports are members of the VLAN by 
default. The configurable VLAN range is 2–4093. VLANs 4094 and 4095 are 
reserved for internal system use.
Ports in trunk and access mode have the default behavior shown in Table 21-2 
and cannot be configured with different tagging or ingress filtering values. 
When you add a VLAN to a port in general mode, the VLAN has the behavior 
shown in Table 21-6.
Table 21-6. General mode Default Settings
Feature
Default Value
Frames accepted
Untagged
Incoming untagged frames are classified into the VLAN 
whose VLAN ID is the currently configured PVID.
Frames sent
Untagged
Ingress Filtering
On
PVID
1