DELL N3000 User Manual

Page of 1460
732
Configuring the Spanning Tree Protocol
The VLAN 1 STP instance of SW1 and SW2 are joined with the STP 
instance running in SW3. VLANs 2 and 3 consider the path across SW3 as 
another segment linking SW1 and SW2, and their SSTP information is 
multicast across SW3.
The bridge priority of SW1 and SW2 for VLAN1 instance is 32769 (bridge 
priority + VLAN identifier).
The bridge priority of SW3 is 32768, per the IEEE 802.w  standard.
SW3 is selected as Root Bridge for the VLAN1 instance that is CST, and SW1 
is selected as Root Bridge for VLAN2 and VLAN3 (based on the low MAC 
address of SW1).
Interoperability with MSTP
RSTP-PV runs an individual RSTP instance for each VLAN. MSTP maps 
VLANs to MSTIs, so one-to-one mapping between VLAN and STP instance 
is not possible.
MSTP runs multiple MSTIs inside a region and maps them to the CIST on 
the border ports. The interoperability model must ensure that internal MSTIs 
are aware of changes to any of the RSTP-PV trees. Therefore, the simplest way 
to ensure the correct behavior is to join ALL RSTP-PV trees to the CST.
Connecting RSTP-PV trees to the CST ensures that changes in any of the 
RSTP-PV STP instances will affect the CST and all MSTIs. This approach 
ensures that no changes go unnoticed and no black holes occur in a single 
VLAN. As with IEEE STP, every tree in the RSTP-PV domain views the 
MSTP regions as virtual bridges with multiple boundary ports. A topology 
change in any of RSTP-PV trees will affect the CST and propogate through 
every MSTI instance in all MSTP regions. This behavior, consequently, makes 
the MSTP topology less stable.
The MSTP implementation simulates RSTP-PV by replicating CIST BPDUs 
on the link facing the RSTP-PV domain and sending those BPDUs on ALL 
VLANs active on the trunk. The MSTP switch processes IEEE STP VLAN 1 
BPDUs received from the RSTP-PV domain using the CIST instance. The 
RSTP-PV+ domain interprets the MSTP domain as an RSTP-PV bridge with 
all per-VLAN instances claiming the CIST Root as the root of their individual 
spanning tree. For the common STP Root elected between MSTP and RSTP-
PV, two options are possible: