DELL N3000 User Manual
Configuring the Spanning Tree Protocol
735
Default STP Values
Spanning tree is globally enabled on the switch and on all ports and LAGs.
Table 22-1 summarizes the default values for STP.
Table 22-1 summarizes the default values for STP.
Table 22-1. STP Defaults
Parameter
Default Value
Enable state
Enabled (globally and on all ports)
Spanning tree mode
RSTP (Classic STP, STP-PV, RSTP-PV and
MSTP are disabled)
Switch priority
32768
BPDU flooding
Disabled
PortFast mode
Disabled
PortFast BPDU filter
Disabled
Loop guard
Disabled
BPDU protection
Disabled
Spanning tree port priority
128
Maximum-aging time
20 seconds
Forward-delay time
15 seconds
Maximum hops
20
Spanning tree transmit hold count
6
MSTP region name
MAC address of switch
MSTP included VLANs
1