DELL N3000 User Manual

Page of 1460
754
Configuring the Spanning Tree Protocol
Figure 22-20. MSTP Configuration Example
To make multiple switches be part of the same MSTP region, make sure the 
STP operational mode for all switches is MSTP. Also, make sure the MST 
region name and revision level are the same for all switches in the region.
To configure the switches:
Create VLAN 10 (Switch A and Switch B) and VLAN 20 (all switches).
console#configure
console(config)#vlan 10,20
console(config-vlan10,20)#exit
console(config-vlan)#exit
Set the STP operational mode to MSTP.
console(config)#spanning-tree mode mst
Create MST instance 10 and associate it to VLAN 10.
console(config)#spanning-tree mst configuration
NOTE: 
Even Switch B does not have any ports that are members of VLAN 10, 
this VLAN must be created to allow the formation of MST regions made up of 
all bridges that exchange the same MST Configuration Identifier. It is only 
within these MST Regions that multiple instances can exist.