DELL N3000 User Manual

Discovering Network Devices

Beginning in Privileged EXEC mode, use the following commands to 

configure LLDP-MED settings that affect the entire switch.

Enter Global Configuration mode.

faststartrepeatcount 

count

Specifies the number of LLDP PDUs that will be 

transmitted when the protocol is enabled.

interface 

interface

Enter interface configuration mode for the specified 

Ethernet interface.

Enable LLDP-MED on the interface.

Allow the port to send topology change notifications.

lldp med transmit-tlv 

[capabilities] [network-

policy] [location] 

[inventory]

Specify which optional TLVs in the LLDP MED set are 

transmitted in the LLDP PDUs.

Exit to Global Config mode.

Exit to Privileged EXEC mode.

View global LLDP-MED settings.

interface

View LLDP-MED settings for all ports or for the specified 

port.