DELL N3000 User Manual

Configuring Link Aggregation

3 View information about LAG 1.

console#show interfaces po1

The commands in this example show how to configure a static LAG on a 

switch. The LAG number is 2, and the member ports are 10, 11, 14, and 17.
To configure the switch:

1 Enter interface configuration mode for the ports that are to be configured 

as LAG members. 

console(config)#interface range te1/0/10-12, 

2 Add the ports to LAG 2 without LACP.

console(config-if)#channel-group 2 mode on

Channel

Ports

Ch-Type

Hash Type

Min-links Local Prf

-------

-------------

-------

---------

--------- ---------

Po1

Active: 

Te1/0/1

Inactive: 

Te1/0/2, 

Te1/0/3,

Te1/0/6, 

Te1/0/7

Dynamic

7

1

Disabled

Hash Algorithm Type

1 - Source MAC, VLAN, EtherType, source module and port Id

2 - Destination MAC, VLAN, EtherType, source module and port Id

3 - Source IP and source TCP/UDP port

4 - Destination IP and destination TCP/UDP port

5 - Source/Destination MAC, VLAN, EtherType, source MODID/port

6 - Source/Destination IP and source/destination TCP/UDP port

7 - Enhanced hashing mode