Nortel Networks 4400 User Manual
11
Passport 4400 and 6400 Quick Start Guide 6.0S1
Logging onto the Passport switches
Log onto the Passport 4400
1
Connect the supplied RJ45 cable from the serial port on your computer or
teminal to the local management port on the 4400.
teminal to the local management port on the 4400.
2
Open a terminal emulation session with the following settings
Data Rate: 9600 bps
Data Bits: 8
Stop Bits: 1
Parity: None
Data Bits: 8
Stop Bits: 1
Parity: None
The port is self sensing. A welcome screen and command line prompt
appears.
appears.
3
Log onto the Command Line Interface (CLI)
> cli
Ignore the password prompt and hit the <enter> key.
4
Reload the default settings into memeory. This command is optional.
CLI> reset system default reset
Log onto the Passport 6400
This document assumes that a network management workstation is already
connected to either the 6400 locally, or is connected to the Passport Network
and can access the 6400 remotely.
connected to either the 6400 locally, or is connected to the Passport Network
and can access the 6400 remotely.
This assumption is based on the usual practice of deploying and setting up the
Passport 6400 nodes prior to the deployment of the 4400s.
Passport 6400 nodes prior to the deployment of the 4400s.