Nortel Networks 4400 User Manual
Configuring a network management connection to a 4400 31
Passport 4400 and 6400 Quick Start Guide 6.0S1
Verifying the network management connection
Verify you have network managment connectivity after configuring the
connection.
connection.
On the 4400
CLI> show ip route table
Shows all networks the 4400 can identify. Ensure an entry for the static
route is displayed.
route is displayed.
CLI> ping <destination ip address>
Confirms whether the connection to the specified IP address is up.
CLI> show fr port spvc circuit table
Shows the SPVC if it is active to the Passport FRUNI.
On the 6400
> d vr/1 ip fwd/*
Shows all networks the Passport ILS can see. If RIP is disabled your
Network Management subnets may not show up here.
Network Management subnets may not show up here.
> d vr/1 ip rdb/*
Shows the routing database of the ILS. If RIP is disabled your Network
Management subnets may not show up here.
Management subnets may not show up here.
> ping -ip(<destination ip address>) vr/1 ip icmp
Ping’s the specified address.
> d fruni/699 dlci/17
A-bit status active to/from interface indicates the SPVC is up.
> d frdte/699 rg/1
Unlocked and enabled.
> d vr/1 pp/frdte60rg1 ipp
Unlocked and enabled.