Pelco C2622M User Manual
C2622M (2/07)
7
•
Designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for
ambient operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
ambient operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
NOTE: Conformal coating is required for operation in environments with relative humidity
above 95 percent (condensing).
above 95 percent (condensing).
•
No performance adjustments required
•
12 VDC or 24 VAC power supply
•
Stand-alone and rack-mountable modular design
•
LED indicators for monitoring of optic signal/laser status, 100BASE-FX port status including far
end fault indication (FEFI), 10BASE-T/100BASE-TX port status, and operating power
end fault indication (FEFI), 10BASE-T/100BASE-TX port status, and operating power
MODELS
The FX82051 module consists of the following series of models:
Multimode Models
*
FX82051MSTR-2
Unmanaged Ethernet switch, five 10BASE-T/100BASE-TX ports, one multimode
ST fiber port, two fibers
ST fiber port, two fibers
FX82051MSCR-2
Unmanaged Ethernet switch, five 10BASE-T/100BASE-TX ports, one multimode
SC fiber port, two fibers
SC fiber port, two fibers
Single-Mode Models
*†
FX82051SSTR-2
Unmanaged Ethernet switch, five 10BASE-T/100BASE-TX ports, one single-
mode ST fiber port, two fibers
mode ST fiber port, two fibers
FX82051SSCR-2
Unmanaged Ethernet switch, five 10BASE-T/100BASE-TX ports, one single-
mode SC fiber port, two fibers
mode SC fiber port, two fibers
*
For conformal coated models, replace the first letter F in the model number with the letter C.
The conformal coated version of FX82051MSTR-2, for example, is CX82051MSTR-2.
†
Single-mode FC connector is available upon request. Contact the factory for additional information.
OPTIONAL ACCESSORIES
The following optional accessories are available:
WM5002-3U
Wall mount base kit for double-width module
WM5002-3UEXP
Wall mount expansion kit for double-width module
RK5000-3U
19-inch rack mount chassis for 14 slots (no power), 3 RUs
RK5000PS-3U
19-inch rack mount chassis for 12 slots with power, 3 RUs
EPS5000-120
External rack power supply, 1 RU, dual 120 W power outputs
RK5001B-3U
Blank filler panel, single width
RK5002B-3U
Blank filler panel, double width
RK5002-1UEXP
Adapter kit that allows a 3 RU double-width fiber module to be used in
RK5000PS-5U rack mount chassis