Compaq 230934-002 User Manual
Overview of the Switch
Modular SAN Array Fabric Switch 6 User Guide
1-5
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: b-ch1 Overview of the Switch.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:33 AM
Installation
Before the MSA Fabric Switch 6 can communicate with Compaq-managed devices,
all devices must be properly connected and powered on.
all devices must be properly connected and powered on.
Ethernet RJ-45 Cable
This connector is provided for management through Simple Network Management
Protocol (SNMP). By default, the MSA Fabric Switch 6 is configured to use an IP
address of 127.0.0.1. To change this IP address, use ACU-XE, a terminal, or a
terminal emulator connected to the DB-9 serial port.
Protocol (SNMP). By default, the MSA Fabric Switch 6 is configured to use an IP
address of 127.0.0.1. To change this IP address, use ACU-XE, a terminal, or a
terminal emulator connected to the DB-9 serial port.
Refer to Chapter 2, “Initial
Configuration of the Switch,” for more detailed information on this subject.
DB-9 Serial Cable
This connector is provided for advanced configuration and management.
The MSA Fabric Switch 6 is designed to function directly out of its shipping
container with no special configuration required. However, you have the ability to
configure and monitor various aspects of the MSA Fabric Switch 6 by using
ACU-XE or CIM-XE or by connecting a terminal or terminal emulator to the serial
port. See Chapter 2, “Initial Configuration of the Switch,” for more information on
using this interface.
container with no special configuration required. However, you have the ability to
configure and monitor various aspects of the MSA Fabric Switch 6 by using
ACU-XE or CIM-XE or by connecting a terminal or terminal emulator to the serial
port. See Chapter 2, “Initial Configuration of the Switch,” for more information on
using this interface.