DELL 211S User Manual
support.dell.com
Installing Your Stand-Alone Storage System
3-3
4.
Place the top hat flange along the right side of the storage system and align the
screw holes (see Figure 3-2).
screw holes (see Figure 3-2).
!"
5.
Using a Phillips-head screwdriver, attach the hat flange to the chassis with four
6-32 x 1/4-inch flat-head screws as shown in Figure 3-2.
6-32 x 1/4-inch flat-head screws as shown in Figure 3-2.
6.
Carefully place the storage system on its right side.
The enclosure indicator lights should be at the bottom.
7.
Repeat steps 3 through 5 to mount the bottom hat flange on the storage system.
1.
Carefully turn the stand-alone chassis upside down.
2.
Locate the two pairs of screw holes on the bottom panel.
1
6-32 x 1/4-inch flat-head screws
2
Hat flange