Cabletron Systems 2H33-37R User Manual
Chapter 5: Local Management
5-88
2H23-50R/2H33-37R User’s Guide
The following briefly defines each field of the RMON Statistics screen:
RMON Index (Read-only)
This field displays the current Ethernet interface for which statistics are
being shown. The 2H23-50R or 2H33-37R has an embedded RMON
agent that gathers statistics for each of its interfaces.
being shown. The 2H23-50R or 2H33-37R has an embedded RMON
agent that gathers statistics for each of its interfaces.
Data Source (Read-only)
This field displays the source of the statistics data that is currently being
displayed on the screen.
displayed on the screen.
shows that the data source for this
RMON index is Interface 1 (Network Port 1, 10 Mbps of CONN 1) by
displaying the name IfIndex.1. If the screen was displaying RMON
statistics for Interface 4 (Network Port 4, 100 Mbps of CONN 2), the
name displayed would be IfIndex.4.
displaying the name IfIndex.1. If the screen was displaying RMON
statistics for Interface 4 (Network Port 4, 100 Mbps of CONN 2), the
name displayed would be IfIndex.4.
shows the association
between the CONN and Network Ports for the 2H23-50R and 2H33-37R.
Owner (Read-only)
This field displays the name of the entity that configured this entry.
Status (Read-only)
The Status field displays the current operating status of the displayed
interface. This field displays “valid” or “invalid”.
interface. This field displays “valid” or “invalid”.
Table 5-14
CONN/Network Interfaces
2H23-50R
2H33-37R
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
CONN 4 = Network Port 7, 10 Mbps
Network Port 8, 100 Mbps