Cabletron Systems 2H33-37R User Manual
Chapter 5: Local Management
5-94
2H23-50R/2H33-37R User’s Guide
Total Errors (Read-only)
Displays the total number of errors.
Collisions (Read-only)
Displays the total number of collisions that were detected.
OOW Collisions (Read-only)
Displays the number of Out Of Window (OOW) collision errors detected.
These collisions can be caused by a station on the network violating
Carrier Sense and transmitting at will, a cable failure occurring during the
transmission of a frame, or a network propagation delay greater than
51.2 µs.
These collisions can be caused by a station on the network violating
Carrier Sense and transmitting at will, a cable failure occurring during the
transmission of a frame, or a network propagation delay greater than
51.2 µs.
CRC Errors (Read-only)
Displays the number of frames with bad Cyclic Redundancy Checks
(CRC) received from the network. The CRC is a 4-byte field in the data
frame that ensures that the data that is received is the same as the data that
was originally sent.
(CRC) received from the network. The CRC is a 4-byte field in the data
frame that ensures that the data that is received is the same as the data that
was originally sent.
Alignment Errors (Read-only)
Displays the number of alignment errors detected. Alignment errors occur
when the total number of bits in a frame are not divisible by eight due to
missing bits in the bytes contained in the frame.
when the total number of bits in a frame are not divisible by eight due to
missing bits in the bytes contained in the frame.
Undersize Packets (Read-only)
Displays the number of frames received with a valid CRC and whose size
was less than the minimum Ethernet frame size of 64 bytes (not including
the preamble).
was less than the minimum Ethernet frame size of 64 bytes (not including
the preamble).
Oversize Packets (Read-only)
Displays the number of frames received with a valid CRC and whose size
exceeded 1518 data bytes (not including preamble).
exceeded 1518 data bytes (not including preamble).
Broadcasts (Read-only)
Displays the number of broadcasts transmitted and received.
Multicasts (Read-only)
Displays the number of multicasts transmitted and received.
Link Status (Read-only)
Indicates if the network or port is linked (Link) or not linked (No Link).