Cabletron Systems 2E43-51R User Manual
General Configuration Screen
2E43-51/2E43-51R User’s Guide
5-29
7.
Use the SPACE bar or BACKSPACE to step through the available
settings until the operation you require appears.
settings until the operation you require appears.
available settings and their corresponding applications.
8.
Press ENTER to accept the application.
9.
Use the arrow keys to highlight the SAVE command at the bottom of
the screen, then press the ENTER key.
the screen, then press the ENTER key.
10.
When the message “SAVED OK” displays, the edits are saved.
5.7.11
Clearing NVRAM
Clearing NVRAM allows the user to clear all user-entered parameters,
such as, the IP address and Community Names from NVRAM.
such as, the IP address and Community Names from NVRAM.
Clear NVRAM as follows:
1.
Use the arrow keys to highlight the Clear NVRAM field.
2.
Use the SPACE bar to toggle the field to YES.
3.
Use the arrow keys to highlight SAVE at the bottom of the screen.
4.
Press ENTER. The warning screen shown in
Table 5-3
COM Port Application Settings
Setting
Application
[LM]
Local Management Session
[UPS]
APC Power Supply SNMP Proxy
!
CAUTION
Clearing NVRAM will result in the loss of all user-entered
parameters. Do not proceed unless this procedure is
completely understood.
parameters. Do not proceed unless this procedure is
completely understood.