Cabletron Systems 6E122-26 User Manual

read-write 

This community name allows read and write 
access to the 6E12X-26 and 6E13X-25 MIB 
objects, excluding security protected fields for 
super-user access only.

super-user 

This community name permits read-write 
access to the 6E12X-26 and 6E13X-25

 

MIB 

objects and allows the user to change all 
modifiable parameters including community 
names, IP addresses, traps, and SNMP objects.

The password used to access Local Management at the Password Screen 
must have Super-User access in order to view and edit the SNMP 
Community Names screen. Using a password with read-only or 
read-write access does not allow the user to view or edit the SNMP 
Community Names screen.

To establish community names, proceed as follows:

Use the arrow keys to highlight the Community Name field adjacent 
to the selected access level.

Enter the password in the field (maximum 31 characters).

Press ENTER.

Repeat steps 1 through 3 to modify the other community names.

Use the arrow keys to highlight SAVE at the bottom of the screen and 
press ENTER. The message “SAVED OK” displays. The community 
names are saved to memory and their access modes implemented.

Any community name assigned in the SNMP Community 
Names screen is a password to its corresponding level of 
access to Local/Remote Management. The community name 
assigned Super-User access is the only one that gives the user 
complete access to Local/Remote Management.