Cabletron Systems 6E122-26 User Manual
Management Terminal Setup
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
5-3
5.3
MANAGEMENT TERMINAL SETUP
Use one of the following systems to access Local Management:
•
An IBM or compatible PC running a VT series emulation software
package
package
•
A Digital Equipment Corporation VT100 type terminal
•
A VT type terminal running emulation programs for the Digital
Equipment Corporation VT100 series
Equipment Corporation VT100 series
•
A remote VT100 type terminal via a modem connection
•
In-band via a Telnet connection
5.3.1
Console Cable Connection
Use the Console Cable Kit provided with the 6C105 chassis to attach the
management terminal to the COM port as shown in
management terminal to the COM port as shown in
Connect an IBM PC or compatible device, running the VT terminal
emulation, to the 6E12X-26 and 6E13X-25 as follows:
emulation, to the 6E12X-26 and 6E13X-25 as follows:
1.
Connect the RJ45 connector at one end of the cable (supplied in the
kit) to the COM port on the 6E12X-26 and 6E13X-25.
kit) to the COM port on the 6E12X-26 and 6E13X-25.
2.
Plug the RJ45 connector at the other end of the cable into the
RJ45-to-DB9 adapter (supplied in the kit).
RJ45-to-DB9 adapter (supplied in the kit).
3.
Connect the RJ45-to-DB9 adapter to the PC communications port.
Figure 5-1
Management Terminal Connection
1
2
3
4
5
PS1
PS2
1
2
14
13
25
26
COM
CPU
3
4
5
6
7
8
9
10
11
12
15
16
17
18
19
20
21
22
23
24
6E122-26
Ethernet
Reserved for FEPIM
Reserved for FEPIM
1
2
COM
CPU
3
4
6E122-26
Ethernet
RJ45 COM Port
RJ45-to-DB9
PC Adapter
UTP Cable
With RJ45 Connectors
PC