DELL PC2716 User Manual

The following mounting instructions apply to the PowerConnect 2708/2716/2724/2748 devices. 

There are three device mounting options:

• Installing in a Rack
• Installing on a Flat Surface
• Installing on a Wall

• Ensure that the rack or cabinet housing the device is adequately secured to prevent it from 

becoming unstable and/or falling over.

• Ensure that the power source circuits are properly grounded.
• Observe and follow the service markings. Do not service any device except as explained in the 

system documentation. Opening or removing covers marked with a triangular symbol with a 

lighting bolt may cause electrical shock. These components are to be serviced by trained 

service technicians only.

• Ensure that the power cable, extension cable, and/or plug is not damaged.
• Ensure that the device is not exposed to water.
• Ensure that the device is not exposed to radiators and/or heat sources.
• Ensure that the cooling vents are not blocked.
• Do not push foreign objects into the device, as it may cause a fire or electric shock.
• Use the device only with approved equipment.
• Allow the device to cool before removing covers or touching internal equipment.
• Ensure that the device does not overload the power circuits, wiring, and over-current 

protection. To determine the possibility of overloading the supply circuits, add together the 

ampere ratings of all devices installed on the same circuit as the device. Compare this total 

with the rating limit for the circuit.

• Do not install the device in an environment where the operating ambient temperature might 

exceed 40ºC (104ºF).

• Ensure that the airflow around the front, sides, and back of the device is not restricted.