DELL PC2716 User Manual
52
Figure 6-6. VLAN Interface Settings
Interface — Indicates the interface number of the port, LAG, or VLAN that is configured on the
switch.
PVID (1-4095) — Assigns a VLAN ID to untagged packets. The possible field values are 1-4094.
PVID (1-4095) — Assigns a VLAN ID to untagged packets. The possible field values are 1-4094.
VLAN 1 is used as the default VLAN. The default VLAN is only used as a port default VLAN ID
(PVID). VLAN 1 cannot be deleted from the system. VLAN 4095 is defined as the discard VLAN,
thus the packets classified to this VLAN are dropped. All ports must have a PVID defined; if no
other PVID value is configured, the default VLAN’s VID will be used.
Frame Type — Packet type accepted by the LAG. The possible values are:
Frame Type — Packet type accepted by the LAG. The possible values are:
Admit Tag Only — Only tagged packets are accepted by the interface.
Admit All — Tagged and untagged packets are accepted by the interface.
Admit All — Tagged and untagged packets are accepted by the interface.
Ingress Filtering — Enables or disables incoming filtering by the interface. Ingress filtering
discards packets which do not include an ingress port.
Updating the VLAN Interface Settings
1
Open the VLAN Interface Settings page.
2
Select the interface (port or LAG)
3
Click Apply Changes.
The switch VLAN Port Settings parameter(s) change(s) is applied.
The switch VLAN Port Settings parameter(s) change(s) is applied.
Configuring LAG Membership
The switch supports six LAGs per system and four ports per LAG. When a port is added to a LAG,
it acquires the properties of the LAG.