Panasonic PT-D5000U User Manual

 Connecting

1. Make sure the shape of the power plug and the AC IN 

terminal on the back of the projector match, then push 
the plug all the way in.

2. Align the side of the “power cord secure lock” with the 

side guide rail of the AC IN terminal of the projector and 
slide it in.

3. Place the latch to the latch catcher and press until it 

clicks.

4. Connect the power cord to a wall outlet.

 Disconnecting

1. Unplug the power cord from the wall outlet.
2. Depress the latch and slide the cover off.

3. Slide the “power cord secure lock” up along the side 

guide rail and remove.

4. Hold the plug and unplug the power cord from the AC IN 

terminal on the back of the projector.



Power indicator lights in orange if the internal cooling fan is 
still operating by internal power supply.

Rail guide

Latch

Latch

Rail guide

• Do not use other than the provided power cord.
• Ensure all the input devices are connected and turned off before connecting the power cord.
• Do not force the connector as this may damage the projector and/or the power cord.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start 

the projection.