Panasonic PT-F200NTU/PT-FW100NTU User Manual
18
Other operations for connection
※ “Glossary” (See page 44)
The newly registered connection is added to the connection list in the window shown in step 1.
The newly registered connection is added to the connection list in the window shown in step 1.
Click [ADD] and enter the IP address
※
(including its periods) of the
connection to be added, and then click [REGISTER].
2
Click [Designate] at the <Select Access Port> window.
The window shown to the right appears.
1
When [Network] is set to [U] and the desired projector is not displayed at the <Select Access Port> window, connections can be
added and deleted by the following operations.
added and deleted by the following operations.
Adding a connection
When a projector with the [ ] mark is selected, the window shown to the right appears. Enter the
password and click [OK]. (See page 32)
password and click [OK]. (See page 32)
Deleting a connection
Select the connection to be deleted at the window shown in step 1 and click [DELETE].
• Clicking [CANCEL] on the password input window displays [
connection.
• When an incorrect password is entered, an error message appears.
Click [OK] to return to the password entry window and enter the correct password again.
Click [OK] to return to the password entry window and enter the correct password again.
Operations when password entry is required for connection
Adding and deleting connections