Panasonic PT-F200NTU/PT-FW100NTU User Manual

31

Additionally perform the following setting using the [AUTHENTICATION] setting.

When setting [OPEN] or [SHARED] as authentication and setting [WEP

※

] as the encryption method:

 

DEFAULT KEY : Set 1 – 4 numerals for the default key.

 

KEY 1 – 4 

: Set these to match the WEP key registered in [DEFAULT KEY].

 

 

 

  Either the 64-bit or 128-bit WEP key can be set.  For the 64-bit key, input five alphanumerics (or a 10-digit 

string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the 
hexadecimal format).

 When setting [WPA-PSK

※

] as authentication : Set key and select [OK].

 

 

 

   Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.

※ “Glossary” (See page 45)

Important video/audio data is protected because AES

※

 encryption processing takes place in advance for all network numbers, 

even if [ENCRYPTION] is set to [NONE].
※ “Glossary” (See page 45)

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊

＊＊＊＊＊＊＊＊

The following settings as [USER1]-[USER3] in the wireless LAN are set before the projector leaves the factory.

SSID : 

Panasonic 

Projector

DHCP : 

OFF

IP ADDRESS 

:  192.168.11.100

SUBNETMASK : 

255.255.255.0

GATEWAY : 

192.168.11.1

MODE : 

AD 

HOC

AUTHENTICATION : OPEN

ENCRYPTION : 

NONE