Panasonic PT-D9510U User Manual
41
Selecting the signal of ET-MD95VM2(sold separately)
When using the projector with the optional ET-MD95VM2 Video Input Module, select the appropriate video signal
format that matches the video equipment you are using.
format that matches the video equipment you are using.
Setting procedure
Press the MENU button. ... The MENU screen will be displayed.
Press the UP (
Press the UP (
) and DOWN (
) arrow buttons to select OPTION.
MENU
AUTO
SETUP
LENS
PICTURE
POSITION
OPTION
SIGNAL
PICTURE
POSITION
OPTION
SIGNAL
LIST
TEST
PATTERN
MENU :
SUB MENU : ENTER
EXIT : MENU
Press the ENTER button. ... The OPTION screen will be displayed.
Press the UP (
Press the UP (
) and DOWN (
) arrow buttons to select VIDEO
MODULE SETTING.
Press the ENTER button. ... The VIDEO MODULE SETTING screen will
be displayed.
Press the UP (
) and DOWN (
) arrow buttons to select the desired
INPUT MODULE.
Press the UP (
Press the UP (
) and DOWN (
) arrow buttons to select the input
signal system and press the UP (
) and DOWN (
) arrow buttons to
select input signal format "LINE or Y/C" or "YC
b
C
r
".
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
"If chose "LINE or Y/C"
in step
above, press the UP (
) and DOWN
(
) arrow buttons to select the video system and press the LEFT (
)
and LIGHT
（
) arrow buttons to select the "AUTO1" or "AUTO2 "
•The selected signal format will be displayed.
(The picture may be distorted while the signal format is being switched.)
Press the MENU button 3 times consecutively.
•The OSD information will go off.
VIDEO MODULE
SETTING
RGB INPUT1 INPUT2 INPUT3
LINE or Y/C
AUTO1
AUTO1
NTSC
PAL
SECAM
NTSC4.43
PAL60
PAL
SECAM
NTSC4.43
PAL60
MENU :
SELECT :
EXIT : MENU
OPTION
SET
RUNTIME : nnnnnh
LAMP
POWER : ＊
＊
＊
＊
＊
＊
CONTRAST
MODE : ＊
＊
RS-232C
SETTING
SYSTEM
INFORMATION
VIDEO MODULE SETTING
NETWORK MODULE SETTING
PASSWORD
NETWORK MODULE SETTING
PASSWORD
MENU :
SUB MENU : ENTER
EXIT : MENU