Panasonic PTDW740ULS User Manual
24 - ENGLISH
Chapter 1 Preparation — Using the remote control
Connecting to the projector with a cable
When you use the system with multiple projectors, configure the units as in the following figure. Use a commercial M3 stereo mini jack cable
and connect the other devices to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the projector.
The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.
The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.
Connecting terminals
Connect to the second
projector
M3 stereo mini jack cable
(commercially available)
Remote
Connect to remote
control wired terminal
Attention
r
f
Use a cable that is 15 m (49'2") or shorter, with 2 core shield. The remote control may not operate when the length of the cable exceeds 15
m (49'2") or when the shielding of the cable is inadequate.