Tripp Lite SU8000RT3UG User Manual

 

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

Model #: SU8000RT3UG 

 

Global 8000VA (8kVA) on-line 6U rack/tower UPS with expandable runtime

(3U power module + 3U battery pack)

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Detachable PDU with manual bypass switch enables hot-swap UPS

replacement without powering off connected loads

200, 208, 230 or 240V selectable input/output voltage, with hardwire input and

six individually breakered C19 outlets

2% output voltage regulation over an input voltage range of 156 to 296

Simultaneous-use RS232 and contact closure monitoring ports, SNMP/Web

Card Slot and EPO interfaces

$250,000 Ultimate LIfetime Insurance (USA, Puerto Rico & Canada only)

 

 

Global 8000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack

spaces (3U power module and 3U battery pack).  Worldwide shipping version with 6 C19 outlets.  Maximum installed rack depth of 32.5 in.

Expandable battery runtime with optional external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts

raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery

power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; 6 individually breakered C19

output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to

connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management

interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment

load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling.

Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC

conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information at

startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD

display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post

rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field replaceable,

; extended warranty and service contracts available.

Applications

Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common

applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems

Global C19 outlet configuration allows a single UPS model to be specified for worldwide use.