Panasonic PT-DS8500U User Manual
About Your Projector
ENGLISH -
19
Preparation
J
CONTROL PANEL
J
Terminals on side
Attention
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to
z
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
Do not touch the metallic parts of LAN terminal and cable.
Please connect the LAN to indoor devices only.
z
VIDEO
Switches to VIDEO input.
Switches to VIDEO input.
S-VIDEO
Switches to S-VIDEO input.
Switches to S-VIDEO input.
RGB1
Switches to RGB1 input.
Switches to RGB1 input.
RGB2
Switches to RGB2 input.
Switches to RGB2 input.
DVI-D/HDMI
Switches to DVI-D or HDMI input.
Switches to DVI-D or HDMI input.
SDI
Switches to SDI input.
(PT-DZ8700U/PT-DS8500U only)
Switches to SDI input.
(PT-DZ8700U/PT-DS8500U only)
<AUTO SETUP> button
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message “PROGRESS” appears on the screen.
(
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message “PROGRESS” appears on the screen.
(
▲▼◄► button
Use these buttons to select menu items,
change settings, adjust levels, and to enter the
[SECURITY] password.
change settings, adjust levels, and to enter the
[SECURITY] password.
<SHUTTER> button
Pressing this button toggles the projector’s
internal mechanical shutter to black out the
projector. (
internal mechanical shutter to black out the
projector. (
<ENTER> button
Press to activate a menu selection or to initiate a
function.
function.
<LENS> button
This button is used together with ▲▼◄► to
adjust focus, zoom and shift by the projection
lens.
adjust focus, zoom and shift by the projection
lens.
<MENU> button
Displays and clears the main menu, and returns to the previous
menu when the menu is displayed.
If you hold it down for at least 3 seconds while the on-screen
indication is [OFF], the [OFF] state is canceled. (
menu when the menu is displayed.
If you hold it down for at least 3 seconds while the on-screen
indication is [OFF], the [OFF] state is canceled. (
<POWER ON> button
Starts the projection while in the
standby mode.
standby mode.
<STANDBY> button
Returns to the standby mode.
SDI IN
Connect an SDI signals.
(PT-DZ8700U/PT-DS8500U
only)
(PT-DZ8700U/PT-DS8500U
only)
SERIAL IN/OUT
Connect an RS-232C cable from/to a computer.
DVI-D IN
Connect a single link DVI-D
signals.
signals.
HDMI IN
Connect a HDMI signals.
RGB2 IN
Connect an RGB or YP
B
P
R
signals.
RGB (YP
B
P
R
)1 IN
Connect an RGB or YP
B
P
R
signals.
REMOTE 2 IN
Connect a cable from an
external control circuit.
external control circuit.
REMOTE 1 IN/OUT
When two or more main
units are used in the system,
they can be connected and
controlled with wired remote
control cable.
units are used in the system,
they can be connected and
controlled with wired remote
control cable.
LAN
Connect a LAN cable for network
connection.
connection.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.