Tripp Lite APS2448UL User Manual

DC INPUT: User supplies cabling. 10 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling

DC INPUT: Requires 48VDC input source capable of delivering 56A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire i

DC INPUT: Full continuous load - 56A at 48VDC. AC INPUT: 33 amps at 120VAC with full inverter and charger load (13A
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output load

Runtime is expandable with any number of user supplied wet or gel type batteries

48V

15A

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.

3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In
AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads.

43

19.5

13.5 x 15 x 21.5

34.3 x 38.1 x 54.6

38.6

17.5

7.25 x 8.5 x 16

18.4 x 21.6 x 40.6

Polycarbonate

Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)

Multi-speed fan

Heavy-duty with built-in battery charger

0-95% non-condensing

32-104 Fahrenheit / 0-40 Celcius

8 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)

In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V
- see manual)